Configuring Printer Options

Before You Begin

THIS IS STEP 3 IN A 5 PART GUIDE. You will NEED TO FOLLOW STEPS 1 & 2 FIRST: 

1. Changing User Account Name with New Admin Account for the First Time
2. Adding Salem Printers to Mac for the First Time

Video

Click here if the video does not play.

Configuring Printer Options

1. Open System Preferences by going to the  logo on the top left of the screen, followed by "System Preferences."
   
2. Select "Printers & Scanners" on the window that appears. This may look different depending on which version of Mac you are running, so please look for the version that matches what you see.
3. Select the "Find_Me" printer, then select "Options & Supplies"
4. On the new window that appears, select the "Options" tab, then change your settings to match the ones shown in the picture below, then select "OK"
   
5. Done!

Printing with Options

1. Open a document that you would like to print
2. Go to File > Print
3. Select "Show Details" on the window that appears
   
4. On the sidebar that appears, select "Finishing" under the dropdown as pictured
   
5. In the options, you can select any of your desired features to the job such as stapling, double-sided printing, etc.
   
6. If you would like to hole-punch, select "Misc. Finishing Modes..." and select your desired holes to be punched on the new window that appears
   
7. Select "OK," then select "Print." Your job will print with your desired selections.

Next Steps

Please proceed to step 4: Setting Up Your Badge on a Printer for the First Time